Category Name, FPV Equipment, Walksnail Avatar
Walksnail Avatar PRO HD VTX Kit – 32GB with Gyroflow
The Walksnail Avatar HD Pro Kit features a VTX with enhanced TVS protection and support for up to 6S. This VTX delivers unmatched stability and resistance to GPS interference with a wide input voltage range of 6V to 25.2V. This kit also features 1080P compatibility, high frame starlight, a 4KM range, and 32GB built-in storage. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology!
$158.99
VTX Specifications:
- Communication Frequency: 5.725-5.850GHz
- Transmitter Power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
- MIC:<25dBm
- 1/O Interface: JST1.0x4(Power in)JST0.8×6(USB)
- Mounting Holes: 25.5×25.5mm; 20x20mm
- Dimensions: 33.5×33.5×10.5mm
- Storage: 8G/32G
- Recording: 1080p/720p
- Weight: 17.6g
- Operating Temperature: -20-40℃
- Channels 8
- Wide Power Input: 6V-25.2V
- Supported FC System Betaflight; Inav; Fettec; ArduPilot; Kiss
- OSD Canvas mode
- Latency: Average delay 22ms
- Antenna: 1(IPEX)
Camera Specifications:
- Resolution: 1080P/60fps;720P/120fps,720P/60fps;1080P/120fps compatibility;
- Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor
- Model: Avatar HD Pro camera
- Min.Illumination: 0.00001Lux
- Dimensions: 19x19x24mm
- Shutter: Rolling shutter
- Coaxial Cable: 140mm
- Ratio: 16/9; 4/3
- Aperture: F1.6
- Weight: 9.5g
- Lens: 8Mp
- FOV: 160°
Antenna Specifications:
- Polarization: LHCP
- Bandwidth: 5600MHz-6000MHz.
- Gain: 1.9dBi
- VSWR: ≤1.5
- Input Impedance: 50Ω
- Interface: IPEX-1
- Size: R15x45mm (without cable）
- Weight: 2g
Included:
- USB transfer extension cable X1
- 4 Pin silicone cable X1
- M2x4mm screws X8
- M2x5mm screws X4
- M2x6mm screws X4
- M2x14mm screws X4
- M2x5x0.5mm gasket X4
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.