Frames
Showing 1–24 of 37 results
-
5 Inch, Frames
Armattan Marmotte DJI Edition 5″ Frame
Armattan’s most advanced design execution to date
The Armattan Marmotte is the culmination of everything that was learned during the design process of all the previous flagship multi-rotors by Armattan. While you may see things that look familiar, nothing is the same. It’s way, way better.The Cage
When you examine the front-end of the Marmotte, you can immediately see the time and care that went into designing this masterpiece. For starters, the cage maintains an entirely Titanium build to protect your camera. A mini-camera, this time, because who uses a full HS1177-sized camera anymore? Within that are a pair of 1mm aluminum fpv-camera savers. On the off chance that a branch snakes in and wants to crack your lens or case, these are meant to bend first. And if they do get pushed out of place they’ll be easier to bend back than your camera is.
Up next is the independent HD-cam angle. That’s right, we’ve brought back the ability to tilt your HD Camera (and the onboard FPV camera) at will. That means you can easily capture some backwards, upside-down flying just like your favorite pilots. The cage braces are crafted from a 10mm titanium block using 6-axis milling specifically so that the bolts that lock in the camera tilt will be easily accessible from any angle. And even better, the milling allows us to fine tune the location and amount of strength that we want; shaving unnecessary grams.
Lastly, we took care not to leave any pilot out. We’ve lowered the stabilization standoff in the cage to ensure that your camera can get down to minimal tilt for you LR or proximity pilots out there. Think 10 degrees or so. And having HD Cam tilt means you won’t have to cut a foam wedge raise the rear, either.SKU: ARM.MARMOT.FRAME. -
Frames, Micro/Whoop
Armattan Odonata 1.6″ Frame 74mm Wheelbase
The Odonata, the smallest FPV frame ever produced by Armattan. But do not let the small size fool you. Designed by a young engineering student, pilot and designer based in New York. His name is Kai Lin, aka Craftedkwads. Build a 1.6″ nano that rips!
SKU: ARM.ODONAT.FRAME. -
Category Name, Frames, Micro/Whoop
BetaFPV Meteor75 Pro Whoop Frame – Choose Color
Built for the largest 1S brushless quadcopter with seven colors of choice. Featuring motor holders for convenient installation, and it has an improved battery slot, which makes a larger capacity 1S battery possible. This really does improve stability and smoothes out the flight. Fit out with F4 1S 5A FC, 1102 and 45mm propellers, Meteor75 Pro Brushless Whoop Frame has an excellent thrust-to-weight ratio performance suitable for 1S HD whoop. Perfect for 45mm props; increases thrust for 1S whoops, with HD digital VTX.
SKU: n/a -
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 65 Lite Frame Kit 1.5mm
This is the Fractal 65 kit without the 65mm whoop frame to chop up for the prop guards. You can provide your own (NBD, BetaFPV, or Happymodel), purchase the 65 frame from us, or even run it without the prop guards!
As you may know, Yves in Taiwan has created this unique kit consisting of a carbon fiber centerpiece with four detached ducts and an ultralight camera mounting system. The overall design is modular, customizable, durable and light-weight!
SKU: FE.F65LIT.FRAME. -
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 75 2.00mm Bottom Plate
A 2.0mm bottom plate and motor screws for a Fractal 75 Build! This is slightly thicker than the frame included in the Fractal 75 Lite Kit, for those pilots that want more strength in their frame.
** IMPORTANT NOTE:
This is only the bottom plate and 14 motor screws for a Fractal 75 build. This does not include any of the TPU pieces used to secure the battery or camera nor any grommets. You will have to print your own or already have them from a previous build or kit.A snippet of the FEA optimization Fractal Engineering performed, ensuring the stress gets spread out across the whole structure without concentrations.Â
SKU: FE.F752MM.FRAME. -
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 75 Lite Frame Kit 1.5mm
This is the Fractal 75 kit without the 75mm whoop frame to chop up for the prop guards. You can provide your own, purchase the V4 frame from us, or even run it without the prop guards!
As you may know, Yves in Taiwan has created this unique kit consisting of a carbon fiber centerpiece with four detached ducts and an ultralight camera mounting system. The overall design is modular, customizable, durable and light-weight!
SKU: FE.F75LIT.FRAME. -
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 75 Pro Max Frame Lite Kit
The long awaited F75 Pro Max Lite Kit is here!
This is designed for prop guards that fit 45mm props such as the Meteor75 Pro. Just like its predecessor the F75 you can replace a single duct if it breaks rather than the entire whoop frame.
FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations
SKU: FE.F7PMAX.FRAME. -
Accessories, Category Name, Frames
Fractal Engineering HD Hardware set for F65/75
The Fractal Engineering HD hardware set is a set of custom designed and printed, ultra-soft TPE grommets to fit both your whoop AIO and your VTX in a most compact way (8.5mm tall). This is for the Fractal F65/75.
Fits HDZero, Walksnail, naked Vista, etc..
SKU: FE.F6575.HDH. -
-
-
Accessories, Category Name, Frames, Happymodel, Motors
Happymodel EX 0802 25000 Kv Motor (Mobula 6 HD)
Accessories, Category Name, Frames, Happymodel, MotorsHappymodel EX 0802 25000 Kv Motor (Mobula 6 HD)
The lightest 0802 brushless motor in the world at only 1.7g. A direct replacement for the Mobula 6 HD, and also a great option for your whoop build. Good dynamic balance and features a double e-clip design which prevents the motor bell from flying off.
SKU: n/a -
Accessories, Category Name, Frames, Happymodel, Motors
Happymodel EX1102 10000Kv (1.5mm Shaft) Motor
The EX 1102 10000 Kv brushless motors with 1.5mm shaft . Tested and great motors for your custom build!
This motor will fit the V3, V2 Mobula 7, and Sailfly-X frame as well.
* Please note the motor wire will be black regardless of rotation of motor. Pictured is the old type that had black/red colored motor wire depending on rotation
SKU: n/a -
Accessories, Category Name, Frames, Happymodel, Motors
Happymodel EX1102 13500Kv (1.5mm Shaft) Motor
The EX 1102 13500 Kv brushless motors with 1.5mm shaft . Tested and great motors for your custom build!
This motor will fit the V3, V2 Mobula 7, and Sailfly-X frame as well.
* Please note the motor wire will be black regardless of rotation of motor. Pictured is the old type that had black/red colored motor wire depending on rotation
SKU: n/a -
-
Category Name, Frames, Micro/Whoop
Happymodel Mobeetle6 Carbon Fiber Freestyle Frame
The replacement carbon fiber frame for the Mobeetle6.
* Motors, propellers, AIO not included. Pictures for illustration only. You are only purchasing the frame (bottom plate).
Also, check out our other accessories for the Mobeetle6.
SKU: HM.FRAME.MOBEE6.FREEST -