Category Name
Showing 49–72 of 146 results
-
Category Name, Electronics, Flight Controllers
Flywoo GOKU GN 405S 40A AIO (MPU6000 ) 25.5 X 25.5
Flywoo’s new top GOKU series AIO are finally here! GOKU GN405 40A FC is an economical and durable all-in-one AIO , which can meet most your FPV needs.
Use powerful F405 chip , integrate 5V BEC, barometer, black box, WS2812LED, support 6 complete hardware serial ports, I2C and other functions are all open.SKU: FW.GOKU.405S.AIO. -
-
Analog, Category Name, FPV Equipment
Foxeer Pico Razer 1200TVL 12*12mm FPV Camera NTSC – Choose Ratio
Analog, Category Name, FPV EquipmentFoxeer Pico Razer 1200TVL 12*12mm FPV Camera NTSC – Choose Ratio
Foxeer’s smallest and lightest camera Razer Pico is only 1.65 grams and performs great in both Day and Low light conditions.
Features a 1/3″ sensor and 1.6mm M7 lens available in 4:3 and 16:9 aspect ratio.SKU: n/a -
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 65 Lite Frame Kit 1.5mm
This is the Fractal 65 kit without the 65mm whoop frame to chop up for the prop guards. You can provide your own (NBD, BetaFPV, or Happymodel), purchase the 65 frame from us, or even run it without the prop guards!
As you may know, Yves in Taiwan has created this unique kit consisting of a carbon fiber centerpiece with four detached ducts and an ultralight camera mounting system. The overall design is modular, customizable, durable and light-weight!
SKU: FE.F65LIT.FRAME. -
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 75 2.00mm Bottom Plate
A 2.0mm bottom plate and motor screws for a Fractal 75 Build! This is slightly thicker than the frame included in the Fractal 75 Lite Kit, for those pilots that want more strength in their frame.
** IMPORTANT NOTE:
This is only the bottom plate and 14 motor screws for a Fractal 75 build. This does not include any of the TPU pieces used to secure the battery or camera nor any grommets. You will have to print your own or already have them from a previous build or kit.A snippet of the FEA optimization Fractal Engineering performed, ensuring the stress gets spread out across the whole structure without concentrations.Â
SKU: FE.F752MM.FRAME. -
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 75 Lite Frame Kit 1.5mm
This is the Fractal 75 kit without the 75mm whoop frame to chop up for the prop guards. You can provide your own, purchase the V4 frame from us, or even run it without the prop guards!
As you may know, Yves in Taiwan has created this unique kit consisting of a carbon fiber centerpiece with four detached ducts and an ultralight camera mounting system. The overall design is modular, customizable, durable and light-weight!
SKU: FE.F75LIT.FRAME. -
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 75 Pro Max Frame Lite Kit
The long awaited F75 Pro Max Lite Kit is here!
This is designed for prop guards that fit 45mm props such as the Meteor75 Pro. Just like its predecessor the F75 you can replace a single duct if it breaks rather than the entire whoop frame.
FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations
SKU: FE.F7PMAX.FRAME. -
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal65 Crown Frame Kit – Choose Color
This Fractal65 kit uses The Crown whoop frame for its ducts.
- The lifecycle of this craft started back in 2018 already, right around when brushless 0603 powertrains appeared and started looking like a solid next step in 65mm whoop class
- Back then I entered the class with a UR65, and although it flew great compared to any other canopy whoop I’ve tried before, something was still off…
- The nylon frame didn’t seem to hold up very well to the added weight and power from the brushless era design.
- It needed to improve on 2 main factors; rigidity and weight.
- So I went to work and came up with the first revision of the project, based on the CrazybeeF3 board and 0603 spinners.
- Basically an UR65 powertrain on a carbon frame with individual ducts and 3D printed parts
- And while it was great for my basher use, the weight, at 23g wasn’t quite up to my standard…so the project fell off, waiting for better hardware to support the idea…
- For almost 3 years I kept flying the first revision occasionally until Happymodel released the right hardware that would make it all possible this time…
- You may think there isn’t much to it, that I’m just pulling it out of my arse, but trust me, there is lots of R&D and testing that went into it; I wouldn’t have released it otherwise.
- This frame was designed to the lightest it could, where it could, without compromising strength, where it needed it the most, in true aerospace engineering fashion.
SKU: n/a -
Accessories, Category Name, Frames
Fractal Engineering HD Hardware set for F65/75
The Fractal Engineering HD hardware set is a set of custom designed and printed, ultra-soft TPE grommets to fit both your whoop AIO and your VTX in a most compact way (8.5mm tall). This is for the Fractal F65/75.
Fits HDZero, Walksnail, naked Vista, etc..
SKU: FE.F6575.HDH. -
Category Name, Micro/Whoop, Propellers
Gemfan 1208-3 31mm Tri Blade (1mm Shaft) Propeller (8 pack) – Choose Color
Category Name, Micro/Whoop, PropellersGemfan 1208-3 31mm Tri Blade (1mm Shaft) Propeller (8 pack) – Choose Color
Gemfan 1208-3 31mm tri blade propellers are specifically designed for higher kv motors, providing higher thrust, greater durability, and longer flight times for indoor tracks. Made of poly carbonate, the blades offer full power and reliable performance. Great on 0802 25000KV motors.
SKU: n/a -
-