Happymodel Mobula8 2S 85mm Brushless HDZero HD Whoop – ELRS version

Features:

• Digital HD FPV experience
• New CrazyF405 ELRS HD flight controller
• Powerful and Smooth
• UART ExpressLRS receiver
• Built-in blackbox for Gyroflow and PID Tune

Specifications:

Motor

• Mode: EX1103 KV11000
• Configu-ration:9N12P
• Stator Diamter:11mm
• Stator Length:3mm
• Shaft Diameter:Φ1.5mm
• Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
• Weight(g):3.8g
• No.of Cells(Lipo):1-2S

Propellers

• Weight:0.88g
• Material: PC
• Pitch:2.3inch
• Props Dia:52.17mm
• Center Thickness:5mm
• Center Hole Dia:1.5mm

Flight Controller

• MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
• GYRO Sensor: BMI270  (SPI connection)
• Mount hole size: 25.5mm*25.5mm
• Power supply: 1-2S battery input (DC 2.9V-8.7V)
• Built-in 12A(each) Blheli_S 4in1 ESC
• Built-in Serial ExpressLRS 2.4G
• Built-in BMP280 Barometer
• Built-in 8MBp blackbox
• Built-in voltage meter sensor , voltage meter scale 110
• Built-in current meter sensor , current meter scale 470

Onboard 4in1 ESC

• Power supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous peak 15A (3 seconds)
• Support BLHeli_S Bluejay firmware
• Factory firmware: Bluejay ESC V0.19
• Firmware target: Z-H-30
• Default protocol: DSHOT300
• When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200

Onboard UART ExpressLRS 2.4GHz Receiver

• Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
• RF Frequency: 2.4GHz
• Antenna: enameled copper wire 31mm length
• Telemetry output Power: <12dBm
• Default firmware version: ExpressLRS V3.0.1
• Firmware target: HappyModel EP 2400 RX
• Could update firmware via ExpressLRS configurator

** If bound to radio but having trouble seeing stick movement in Betaflight, then you may need to turn off the “Model Match” factory setting in the ELRS web GUI.

HDZero Version

• HDZero Nano Lite Camera
• 14x16x11 mm
• 1.5gram
• 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
• Excellent low light performance
• Fov:
• 4:3: D:130° H:108° v:84°
• 16:9:D:122° H:108° V:65°
• HDZero Whoop Lite VTX
• 1-3S Input
• 25mW/200mW RF Output-SmartAudio Support
• 25.5×25.5 M2 Soft Mounting- Antenna Retention
• Removable Shielding Box- 32.5×32.5mm(29x29mm inner)
• 4.5grams/4mm Thickness (without shielding)

Included:

• Mobula8 Frame x1
• CrazyF4HD ELRS flight controller firmware target:BETAFLIGHTF4 x1
• EX1103 KV11000 brushless motor x4
• Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw) x1
• HDZERO Whoop Lite bundle x1
• Canopy(DJI O3/Walksnail/HDZERO optional) x1
• Screw driver x1