TuneRC Noodle AT32F435 3S-6S Flight Controller 30x30mm
The Noodle AT32F435 FC is a flight controller that is suitable for various different builds from racing, freestyle quads, to cinelifters. No matter whether you fly analog or digital, prefer solder pads over connectors, or identify as a racer, freestyle pilot, or photographer, the Noodle AT32F435 FC is designed to meet all your needs.
The Noodle AT32F435 FC features solder pads on one side and connectors on the other side. It also comes with dual BEC 5V 1.5A, 9V 2A, suitable for both analog and digital builds. 4x UARTs, I2C port, onboard barometer, 8M blackbox, all of these features make the Noodle a go-to option for your builds.
$28.65
Versatile and User-friendly Flight Controller
Suitable for various different builds from racing, freestyle quads to cinelifters and etc
The Noodle AT32F435 FC is a flight controller that makes everyone happy. Whether you fly analog or digital, whether you prefer solder pads or connectors, whether you are a racer or a freestyle pilot or a photographer, our fresh new Noodle AT32F435 FC fulfills all of your wishlists.
The Noodle AT32F435 FC features solder pads on one side and connectors on the other side. Besides, it also comes with dual BEC 5V 1.5A, 9V 2A, suitable for both analog and digital builds. 4x UARTs, I2C port, onboard barometer, 8M blackbox, all of these features make the Noodle a go-to option for your builds.
Dedicated LDO for Gyro ICM42688P:
Nothing is more frustrating than struggling to tune a noisy flight controller. A dedicated LDO for gyro is designed to provide a stable and clean power supply for the ICM42688P, making Noodle AT32F45 FC a robust brian for your quads.
Why AT32F435CGU7 MCU?
The AT32F435CGU7 chip is high-performance. Its processing speed is 288MHz and it has 1MB flash memory, which means the AT32F435 performance is comparable to its counterparts.
And since Betaflight 4.5, the support for AT32 FC is introduced, you don’t need to mess around drivers or anything else. You can directly configure the Noodle AT32F435 FC in Betaflight configurator.
Specifications:
- MCU: AT32F435CGU7
- OSD: AT7456E
- Onboard Gyro: ICM-42688-P
- Onboard Barometer: DPS310
- Flash: W25Q64 (8M)
- ESC Signal: M1-M4
- 4 x UARTs
- 1 x I2C
Electronics Specification
- Input Voltage: 10.5-28V (3s-6s)
- BEC Output: 5V1.5AÂ 9V2A
Firmware
- Betaflight Target: TUNERCF435
Dimensions
- Widest Dimension: 37mm x 37mm
- Mounting Holes Pattern: 30.5mm x 30.5mm (M3 grommets to make M3 mount)
- Weight: 7.3g
Connectors
- Except LED connector and buzzer connector, all the other connectors onboard apply to Betaflight connector standard
Included:
- TUNERC Noodle AT32F435 3S-6S Flight Controller – 30x30mm x1
Download the full wiring diagram & specifications guide here.
There are no reviews yet.