Fractal Engineering Fractal 75 Pro Max Frame Lite Kit
The long awaited F75 Pro Max Lite Kit is here!
This is designed for prop guards that fit 45mm props such as the Meteor75 Pro. Just like its predecessor the F75 you can replace a single duct if it breaks rather than the entire whoop frame.
FEA optimization test performed, ensuring the stress gets spread out across the whole structure without concentrations
$22.99
Features:
- A completely new variant of the F75, but this is actually 84mm motorpost to motorpost distance
- The same winning recipe, scaled to fit 45mm props with ducts while keeping the camera up front
- Extended camera mount to reduce prop guards in view
- Low center of gravity, by bringing the AIO close to the frame/motors
- Allows mounting with USB pointed up for easy accelerometer calibration
- Easy maintenance, break a duct, replace only the single duct
- No need for a canopy as all electronics are tucked safely between the ducts
- Approximately 21g using the Happymodel DiamondF4 AIO
Included:
- 1x 1.5mm F75 Pro Max© Carbon Fiber bottom plate
- 2x TPU straps (2x 450mAh)
- 14x M1.4 x 5mm motor screws
- 4x M1.7 x 5mm self-threading screws for FC
- 4x M1.7 x 6mm self-threading screws for FC with taller grommets
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Category Name, Walksnail Avatar
Walksnail Avatar HD Mini 1S VTX Kit w/Nano Camera
 AVATAR MINI 1S KIT
Features
1080P/60fps, 22ms low latency, 3.1V-5V, Power 350mW,Built-in 8G storage, 6.8g light weight
1080P/60FPS,720P/120FPS
The Avatar HD system uses H.265 code,an industry-leading technology,
to provide 1080p FPV image quality with ultra-low latency.
6.8g light weight board
The Avatar mini 1S VTX weights only 6.8g and fits perfectly with the 75X quad.
22ms Low Latency
Supports both high frame rate and standard frame rate,
in high frame rate,it has an average latency of 22ms.
8G Built-in Storage
The Avatar mini 1s vtx comes with 8g built-in storage,it can record 1080p
with 60fps or 720pwith 100fps/60fps HD flight videos without interference.
SKU: CDDX.1SKIT -
Category Name, Electronics, Other Electronics
DarwinFPV Tiny Ape VTX 25/200/400/600 mW
DarwinFPV 600mW VTX is a light weight, small size, high quality 25-600mW VTX, it provides optional 25/200/400/600mW output power, integrated 4Pin socket, plug and play is very convenient. The VTX settings can be adjusted through the flight control, that is, the transmitted power, frequency band and channel.
Indicator Light Description:
Frequency and Power Control Method:
Adjust VTX frequency and power via Betaflight
â‘ Connect the RX white line of VTX to the TX signal line or SOFTSERIAL1 signal line of the FC spare UART port;
â‘¡Select the port tab, enable the TBS (SmartAudio) function setting of the connected port and save it;
(The above figure takes the TX signal line as an example; SOFTSERIAL1 is the same, just select the TBS (SmartAudio) function according to the corresponding port).
â‘¢ After entering the VTX parameter adjustment interface, select the desired frequency and power, and then “save” to save and exit.
SKU: DF.VTX.TINYAP. -
Category Name, 2S-4S Batteries, Batteries/Chargers
Flywoo Explorer 420mAh HV 2S 80C LiPo Battery (2 pack) XT30
Category Name, 2S-4S Batteries, Batteries/ChargersFlywoo Explorer 420mAh HV 2S 80C LiPo Battery (2 pack) XT30
Explorer series batteries are specially designed for long flight time and all are high voltage battery. Using this battery will give you a significant increase in flight time as well as a bit more power over the stock battery. Perfect for the Flywoo Baby Nano 20.
SKU: FW.BATT2S.420MA.80C. -
Category Name, Bind and Fly Quads, Micro/Whoop
Happymodel Moblite7 Walksnail Avatar 1S 75mm HD Whoop V2.0
Category Name, Bind and Fly Quads, Micro/WhoopHappymodel Moblite7 Walksnail Avatar 1S 75mm HD Whoop V2.0
The Happymodel Moblite 7 Walksnail Avatar Whoop is a 75mm HD brushless whoop weighing just 33.5 grams. It features the Walksnail Avatar 1S Mini VTX and Nano Camera and built-in SPI ELRS 2.4GHz.  With powerful RS1002 KV20000 motors, and Superbee F4 Lite flight controller, this is a great performing high-definition whoop you can fly just about anywhere.
V2.0 update log: Changed to GNB27 connector and V4 frame, no need 3d print battery tray anymore, and changed the propeller to Gemfan 1635-3 propellers.
SKU: HM.MOBLI7.WS.ELRS.
There are no reviews yet.