Happymodel Mobula8 1-2S 85mm Brushless Analog Whoop – ELRS version

Whoop Features:

• X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
• VTX Power up to 400mw
• ELRS V2.0 (Default), can be flashed to ELRS V3.0
• EX1103 KV110000 motors
• CaddxFPV Ant FPV camera
• Smooth and powerful
• Compatible for 1S-2S Lipo/LIHV battery
• 3D Printed Camera Lens Protector

Specifications:

• Brand Name: Happymodel
• Motor: EX1103 KV11000
• AIO: X12 5-IN-1 AIO flight controller
• Camera: CaddxFPV Ant FPV camera
• Prop: Gemfan 2023-3 propellers
• Weight: 42.7g
• Input Voltage: 1-2S
• Wheelbase: 85mm
• Size: 120mmx120mmx50mm

Motor Specifications

• Model: EX1103 KV11000
• Configuration: 9N12P
• Stator Diamter: 11mm
• Stator Length: 3mm
• Shaft Diameter: Φ1.5mm
• Motor Dimension(Dia.xLen): Φ13.5mmx15.5mm
• Weight(g): 3.8g
• No.of Cells(Lipo): 1-2S

Propeller Specifications

• Weight: 0.88g
• Material: PC
• Pitch: 2.3inch
• Props Dia: 52.17mm
• Center Thickness: 5mm
• Center Hole Dia: 1.5mm

Flight Controller Specifications

• MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: ICM20689 or ICM42688P(SPI connection)
• Mount hole size: 25.5mm x 25.5mm
• Power supply: 1-2S battery input (DC 2.9V-8.7V)
• Built-in 12A(each) Blheli_S 4in1 ESC
• Built-in Betaflight OSD(SPI Control)
• Built-in 5.8G OpenVTX 0mw~400mw
• Built-in ExpressLRS 2.4Ghz
• Built-in voltage detection
• Built-in current sensor

Onboard 4in1 ESC

• Power supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous peak 15A (3 seconds)
• Support BLHeliSuite programmable
• Firmware target: Z_H_30
• Default protocol: DSHOT300
• Support Bluejay firmware

Onboard SPI ELRS 2.4GHz Specifications

• Packet Rate option: 50Hz/150Hz/250Hz/500Hz
• ExpressLRS Firmware version: V2.0
• RF Frequency: 2.4GHz
• Antenna : SMD antenna
• Telemetry output Power: <12dBm
• Receiver protocol:  SPI ExpressLRS
• Could flash FC firmware to support ExpressLRS v3.0 TX module

Included:

• HappyModel BNF Mobula8 1-2S Brushless Analog Whoop – ELRS x 1
• Gemfan Hurricane 2023 tri-blade propellers (4CW+4CCW) x 1
• Screw Driver x 1
• Extra camera canopy x 1