Walksnail Avatar PRO HD VTX Kit – 32GB with Gyroflow
The Walksnail Avatar HD Pro Kit features a VTX with enhanced TVS protection and support for up to 6S. This VTX delivers unmatched stability and resistance to GPS interference with a wide input voltage range of 6V to 25.2V. This kit also features 1080P compatibility, high frame starlight, a 4KM range, and 32GB built-in storage. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology!
$158.99
VTX Specifications:
- Communication Frequency:Â 5.725-5.850GHz
- Transmitter Power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
- MIC:<25dBm
- 1/O Interface:Â JST1.0x4(Power in)JST0.8×6(USB)
- Mounting Holes:Â 25.5×25.5mm; 20x20mm
- Dimensions:Â 33.5×33.5×10.5mm
- Storage:Â 8G/32G
- Recording:Â 1080p/720p
- Weight:Â 17.6g
- Operating Temperature: -20-40℃
- Channels 8
- Wide Power Input:Â 6V-25.2V
- Supported FC System Betaflight; Inav; Fettec; ArduPilot; Kiss
- OSD Canvas mode
- Latency:Â Average delay 22ms
- Antenna:Â 1(IPEX)
Camera Specifications:
- Resolution: 1080P/60fps;720P/120fps,720P/60fps;1080P/120fps compatibility;
- Image Sensor: 1/1.8-Inch Sony Starvis â…¡ Sensor
- Model: Avatar HD Pro camera
- Min.Illumination: 0.00001Lux
- Dimensions: 19x19x24mm
- Shutter: Rolling shutter
- Coaxial Cable: 140mm
- Ratio: 16/9; 4/3
- Aperture: F1.6
- Weight: 9.5g
- Lens: 8Mp
- FOV: 160°
Antenna Specifications:
- Polarization: LHCP
- Bandwidth:Â 5600MHz-6000MHz.
- Gain:Â 1.9dBi
- VSWR: ≤1.5
- Input Impedance: 50Ω
- Interface:Â IPEX-1
- Size: R15x45mm (without cable）
- Weight:Â 2g
Included:
- USB transfer extension cable X1
- 4 Pin silicone cable X1
- M2x4mm screws X8
- M2x5mm screws X4
- M2x6mm screws X4
- M2x14mm screws X4
- M2x5x0.5mm gasket X4
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
-
Category Name, Electronics, Other Electronics
Flywoo GOKU GM10 Mini V3 GPS
Flywoo’s GOKU GM10 V3 GPS series has arrived! Using the latest M10050 GNSS chip. Compared with the previous generation GM8 V2, the positioning is more accurate, and the speed of satellite search is faster.
Note: The chip of GOKU GM10 V3 GPS is M1005. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA protocol But there is no difference in performance between the two protocols
BETAFLIGHT：
Use firmware above 4.3.0
INAV：
Use the latest 6.0.0 configurator, the latest firmware above 5.0.0
SKU: FW.10MV3.GPSM. -
Category Name, Walksnail Avatar
Walksnail Avatar HD Mini 1S VTX Kit w/Nano Camera
 AVATAR MINI 1S KIT
Features
1080P/60fps, 22ms low latency, 3.1V-5V, Power 350mW,Built-in 8G storage, 6.8g light weight
1080P/60FPS,720P/120FPS
The Avatar HD system uses H.265 code,an industry-leading technology,
to provide 1080p FPV image quality with ultra-low latency.
6.8g light weight board
The Avatar mini 1S VTX weights only 6.8g and fits perfectly with the 75X quad.
22ms Low Latency
Supports both high frame rate and standard frame rate,
in high frame rate,it has an average latency of 22ms.
8G Built-in Storage
The Avatar mini 1s vtx comes with 8g built-in storage,it can record 1080p
with 60fps or 720pwith 100fps/60fps HD flight videos without interference.
SKU: CDDX.1SKIT
There are no reviews yet.