Walksnail Avatar V2 HD VTX Kit – 32GB with Gyroflow
This Walksnail Avatar HD Kit V2 features built-in 32GB storage and Gyroflow support. The 2K/120fps/4:3 native sensor camera allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Other features include an updated PCB board, an updated outer shell, low latency of 22ms, and a 4Km range.
$149.99
Specifications:
- Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;
- Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
- Min.Illumination: 0.001Lux
- Dimensions: 19*19*22mm
- Coaxial Cable: 140mm
- Shutter Rolling shutter
- Ratio: 4:3 native /16:9
- Gyroflow: supported
- Aperture: F2.0
- Lens: 2.1mm
- Weight: 7.2g
- FOV: 160°
AVATARÂ V2Â VTX
- Transmitter Power (EIRP: FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
- Supported FC System: Betaflight; Inav; Fettec; ArduPilot;Kiss
- 1/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
- Communication Frequency: 5.725-5.850GHz
- Mounting Holes: 25.5*25.5mm; 20*20mm
- Operating Temperature: -20-40℃
- Dimensions: 33.5*33.5*10.5mm
- Latency: Average delay 22ms
- Wide Power Input: 6V-25.2V
- Model: Avatar V2 module
- Recording: 1080p/720p
- OSD: Canvas mode
- Antenna: 1(IPEX)
- Storage: 32GB
- Weight: 17.6g
- Channels: 8
AVATAR V2 ANTENNA
- Frequency range: 5600MHz-6000MHz
- Size: R15 X 45mm(without cable)
- Input Impedance: 50Ω
- Polarization: LHCP
- Interface: IPEX-1
- Gain: 1.9dBi
- VSWR: ≤1.5
- Weight: 2g
Included:
- Walksnail Avatar HD VTX V2 – 32GB w/ Gyro x1
- Walksnail Avatar HD Camera V2 x1
- Walksnail Avatar Antenna V2 x1
- USB transfer extension cable x1
- M2*5*0.5mm gasket x4
- 4 Pin silicone cable x1
- M2*14mm screws x4
- M2*4mm screws x8
- M2*5mm screws x4
- M2*6mm screws x4
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Category Name, Electronics, Other Electronics
Flywoo GOKU GM10 Nano V3 GPS
The GOKU GM10 V3 GPS series has arrived! Using the M100500 GNSS chip. Compared with the previous generation GM8 V2, the positioning is more accurate, and the speed of satellite search is faster.
Note: The chip of GOKU GM10 V3 GPS is M1005. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA protocol But there is no difference in performance between the two protocols
BETAFLIGHT：
Use firmware above 4.3.0
INAV：
Use the latest 6.0.0 configurator, the latest firmware above 5.0.0
SKU: FW.10NV3.GPSM. -
-
Category Name, Bind and Fly Quads, Micro/Whoop
Happymodel Moblite7 Walksnail Avatar 1S 75mm HD Whoop V2.0
Category Name, Bind and Fly Quads, Micro/WhoopHappymodel Moblite7 Walksnail Avatar 1S 75mm HD Whoop V2.0
The Happymodel Moblite 7 Walksnail Avatar Whoop is a 75mm HD brushless whoop weighing just 33.5 grams. It features the Walksnail Avatar 1S Mini VTX and Nano Camera and built-in SPI ELRS 2.4GHz.  With powerful RS1002 KV20000 motors, and Superbee F4 Lite flight controller, this is a great performing high-definition whoop you can fly just about anywhere.
V2.0 update log: Changed to GNB27 connector and V4 frame, no need 3d print battery tray anymore, and changed the propeller to Gemfan 1635-3 propellers.
SKU: HM.MOBLI7.WS.ELRS.
There are no reviews yet.