Battery Chargers/Testers
Showing all 10 results
-
Backpacks & Cases, Batteries/Chargers, Battery Chargers/Testers, Category Name, FPV Accessories, FPV Drip, FPV Gear
BetaFPV LiPo Battery Safety Hand Bag
Backpacks & Cases, Batteries/Chargers, Battery Chargers/Testers, Category Name, FPV Accessories, FPV Drip, FPV GearBetaFPV LiPo Battery Safety Hand Bag
The safety handbag is stitched together with an extremely strong fire retardant thread and has a double-zipper lid. It offers extra protection for your lipo battery, micro drone, and your charging location, which could protect your home and valuables from a fire due to a lipo battery failure. Useful for storage, travel, and charging.
SKU: BF.LIPO.BAG. -
Batteries/Chargers, Battery Chargers/Testers
CellMeter 8 V2.0 Multifunction 2-8S Battery Tester
Calling it a battery tester is an understatement! This CellMeter 8 V2 is a multifunctional device allowing you to check a battery’s voltage, balance a battery, discharge a battery, and even test a servo.
SKU: CELLME.V2.0.TESTER. -
Batteries/Chargers, Battery Chargers/Testers
Happymodel PH2.0 1S USB Battery Charger
The Happymodel USB Charger is tailored for a 200-400 mAh battery. It has an LED light to indicate it is charging and the light will go off when it is complete. It features a 4.2V/4.35V switchable button as well.
SKU: HM.PH21S.CHARGE. -
Batteries/Chargers, Battery Chargers/Testers
LiPo Battery Cell Checker Tester with Low Voltage Alarm for 1-8S Batteries
Batteries/Chargers, Battery Chargers/TestersLiPo Battery Cell Checker Tester with Low Voltage Alarm for 1-8S Batteries
A two in one tool that gives a loud alarm (try alittle hot glue to lower loudness if too loud) warning of low voltage and can also display battery voltage. Plug a 1-8s battery’s balance connector into the device, and you will receive an instant readout of the total voltage as well as an individual reading of each cell. A must have on hand while flying!
SKU: ACCS.CLCHKR.TESTER. -
Batteries/Chargers, Battery Chargers/Testers
ToolkitRC M7 Multifunctional Balance Charger 200W DC 10A 2-6S
Batteries/Chargers, Battery Chargers/TestersToolkitRC M7 Multifunctional Balance Charger 200W DC 10A 2-6S
Specifications:
- Product size: 73 x 51 x 27mm
- Product weight: 90g
- Pack weight: 150g
- LCD: IPS 2.0inch LCD 320 x 240 Pixel
CHARGER
- Input voltage 7.0-28.0V @MAX 12A
- Discharge power: 200W @MAX 10A Recycle mode / 10W@3A Normal mode
- Type of battery:Â Lipo LiHV LiFe Lion@1-6S / NiMh @1-16S Pb @1-10S
- Charger power: 200W @MAX 10A
- Balance current400mA @2-6S
- USB: 2.1A @5.0V or Upgrade
OUTPUT
- Power supply:Â 1.0-28.0V @1.0-10A mode:CC+CV
- SBUS: 880-2200us x 16CH @20-100Hz
- PPM: 880-2200us x 8CH @20-50Hz
- PWM: 500-2500us @20-1000Hz
- OverCurrent Cutoff time: <5ms
MEASURER
- SBUS: 880-2200us x 16CH @20-100Hz
- Internal resistance: 1-99mR @1-6S
- PPM: 880-2200us x 8CH @20-50Hz
- ESC: 200W@10A PWM Output
- PWM: 880-2200us @20-400Hz
- Voltage:1.0-5.0V @1-6S
Included:
- 1x ToolkitRC M7 Charger
- 1x USB Charger Cable
SKU: TK.M7MBC.CHARGE. -
Batteries/Chargers, Battery Chargers/Testers, Category Name, Electronics, Other Electronics
TuneRC 1S LiPo Battery Storage Discharger for PH2.0
Batteries/Chargers, Battery Chargers/Testers, Category Name, Electronics, Other ElectronicsTuneRC 1S LiPo Battery Storage Discharger for PH2.0
Tired of puffy batteries? Storage charge your battery safely! Ready to fly but bad weather or something else ruins your plans? Leaving all your 1S batteries fully charged, which will cause puffing and lower your batteries’ life span. This 1S discharger is a great way to avoid this. It stops discharging completely when done, so you can be sure your 1S batteries are safe. Easy to use – just plug the 1S battery in and the red LED will light up. Once the discharging is complete, the LED will turn off. If the LED doesn’t turn on, press the button to switch the discharger to working mode.
SKU: TR.CH.D005. -
Accessories, Batteries/Chargers, Battery Chargers/Testers, Category Name, Frames
TuneRC Rubber Band Battery Holder
Accessories, Batteries/Chargers, Battery Chargers/Testers, Category Name, FramesTuneRC Rubber Band Battery Holder
This is a must have for your Toothpick builds!
This includes rubber bands lengths. 150mm and 160mm (2 of each). Both options can secure most toothpick build’s 1S-4S battery from 1S ~500mah, 3S ~300mah to 4S ~450mah battery. Since the rubber band is pretty elastic, it can fit even more battery options than mentioned. Pick one up today!
SKU: TR.AC.0001. -
Batteries/Chargers, Battery Chargers/Testers, Category Name
ViFly Toothstor BT3.0 2S Balance Battery Charger
Batteries/Chargers, Battery Chargers/Testers, Category NameViFly Toothstor BT3.0 2S Balance Battery Charger
The ViFly ToothStor is a combination of a 2S charger and discharger. It has 4 target voltages per cell (3.8V/3.85V/4.2V/4.35V), set your target voltage like 3.8V/cell (LiPo Storage Voltage), it will start the charging or discharging process automatically when the battery is lower or higher than 3.8V.
SKU: VF.TOOTHS.CHARGE. -
Batteries/Chargers, Battery Chargers/Testers
ViFly Whoopstor V2 1S LiPo/LiHV 6 Channel Battery Charger/Discharger BT2.0 PH2.0
Batteries/Chargers, Battery Chargers/TestersViFly Whoopstor V2 1S LiPo/LiHV 6 Channel Battery Charger/Discharger BT2.0 PH2.0
ViFly’s new 1S micro/whoop battery charger is what you need if you are rippin 1S packs! Show your 1S the same love you show your larger batteries and keep them at storage levels to make them last.
The Whoopstor supports both PH2.0 and BT2.0. and features 6 Ports to Storage Charge/Discharge.
SKU: VF.WSTOV2.CHARGE. -
Batteries/Chargers, Battery Chargers/Testers
ViFly Whoopstor V3 1S LiPo/LiHV 6 Channel Battery Charger/Discharger BT2.0 PH2.0
Batteries/Chargers, Battery Chargers/TestersViFly Whoopstor V3 1S LiPo/LiHV 6 Channel Battery Charger/Discharger BT2.0 PH2.0
The new v3 version is finally here!  ViFly’s new 1S whoop battery charger supports both PH2.0 & BT2.0.  VIFLY WhoopStor 3 is the first 1S LiPo charger with storage function. It includes both charging and discharging functions. Just select your target voltage, it will do it for you automatically. It now features a buzzer to beep when one charging circle finished, if you don’t like the beeping, you can turn the buzzer off manually.
SKU: n/a