Happymodel EP82 VRX-Backpack Module
Out of stock
So what is this VRX backpack? This Happymodel “backpack”is designed to allow wireless communication between ExpressLRS, and other FPV-related devices for command and control, or for querying config. Currently there aren’t many VRX modules that can allow them to communicate with ELRS. This small ESP-based receiver can be “piggybacked” onto your VRX module, which allows ExpressLRS to control the band and channel that your goggles are set to. We call this device the “VRX-Backpack”.
$4.99
Out of stock
Specifications:
- Size: 10.5mmx10.5mmx3.5mm
- Weight: 0.37gram
- MCU: ESP8285
Included:
- 1x Happymodel EP82 VRX Backpack Module
Detailed information can be found at:
Github ELRS Backpack
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Electronics, Other Electronics
ViFly Beacon Wireless Self-Powered Drone Buzzer
VIFLY Beacon is an advanced self-powered drone buzzer for any types of quads. Based on the motion sensor, it can detect the abnormal movement of the quads and make the alarm automatically to help you find the lost quad easily when the quad crashed. Some aerial drones like DJI have GPS, but it only provides you the draft location when you crash it, with the sound help, you can find your quad precisely. Very easy to setup, everyone can make it work even you are a newbie. Install it on your DJI quads, FPV quads or airplanes to prevent the drone losing again.
Main Features:
Lost Drone Alarm by Motion Sensor
Some drones like DJI models are installed with GPS that only provide you the draft location, with the sound help, you can find your lost drone precisely. With the built-in motion sensor and lipo battery, VIFLY Beacon can detect the drone crash automatically and make the alarm to help you locate the lost drone.
Wireless, No Soldering Required
The mechanism of VIFLY Beacon is based on the motion sensor, attach it anywhere on the drone to detect the movement, no wire, no soldering.
Loud Sound & Bright LED
To easily find the lost drone in long distance, VIFLY Beacon is installed with a very loud beeper that the dB is over 100. In addition, the LED on VIFLY Beacon can flash automatically when the built-in light sensor detects the light darkness.
Anti Theft Technology
If someone wants to take the done away when it is in alarm status, VIFLY Beacon will beep continuously to warn the picker.
Position Light at Night
VIFLY Beacon LED light can flash automatically at night to make the drone visible when the built-in light sensor detects the darkness.
SKU: VF.BEACON. -
Category Name, Electronics, ELRS Receivers
RadioMaster RP1 2.4GHz ELRS v3 Nano Receiver
These RadioMaster nano receivers, developed by Jye Smith of ExpressLRS, have ESP8285 MCU and SX1280 RF chip. RP1 has a UFL antenna socket while RP2 has a built-in ceramic antenna, making it super light and small. Both have WIFI built in, allowing you to upgrade firmware and configure the Receiver via WebUI. Both RP1 and RP2 have low-latency, high-refresh-rate RF module, making them ideal for FPV and long-range. Furthermore, their ultra-light Nano size allows you to fit them anywhere, from whoops to fixed-wing models. The RP1 comes with ELRS Firmware V3 pre-installed.
Note: The packaging in this product will refer to ELRS V2 pre-installed, it has been confirmed ELRS V3 is pre-installed.
SKU: RM.RP1.RX.ELRS -
Electronics, Other Electronics
ViFly GPS-mate External GPS Power Module
Tired of draining your battery as you wait for the GPS fix? Wish the GPS was self-powered so that it didn’t have to get a new fix every time you plug up a new pack? Battery ejected during crash and now the GPS is useless? The GPS-mate is what you’re looking for!
Why Vifly designed the GPS-mate?
Most drone pilots have a problem when using the GPS on their drones. GPS modules are slow, and get interference. To get a fix, a pilot must wait many minutes for a GPS fix. To do this, everything must be powered, which drains the battery and causes extra interference. It also has potential risk to cause overheating issues to your quad components. In addition, when you finish a flight cycle and change the quad battery, the GPS needs to get a hot-start fix as the quad battery disconnected. We want to fix the pain, so we design and produce GPS-mate, the external power module just for GPS.What exactly does the GPS-mate do?
VIFLY GPS-mate is an external power module just for GPS, there is a switch to turn on and off the unit. With this device, once the pilot wants to fly, he flips the switch and only the GPS gets powered. When the GPS fix finished, the pilot connects the drone LiPo. The drone LiPo powers the drone, and recharges the GPS battery. The GPS never loses power until the switch is turned off, so the pilot never needs to get another fix for the whole session.We also embed VIFLY Finder 2 function into this device, it can work as a standard buzzer that controlled via your radio when the quad battery is connected, it also can work as a standalone buzzer that help you find the lost drone when the main battery has been ejected.
SKU: VF.GMATE.MODULE.
There are no reviews yet.