Fractal Engineering Fractal 65 Lite Frame Kit 1.5mm
This is the Fractal 65 kit without the 65mm whoop frame to chop up for the prop guards. You can provide your own (NBD, BetaFPV, or Happymodel), purchase the 65 frame from us, or even run it without the prop guards!
As you may know, Yves in Taiwan has created this unique kit consisting of a carbon fiber centerpiece with four detached ducts and an ultralight camera mounting system. The overall design is modular, customizable, durable and light-weight!
$16.99 $19.99
-
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 65 Lite Frame Kit 1.5mm
This is the Fractal 65 kit without the 65mm whoop frame to chop up for the prop guards. You can provide your own (NBD, BetaFPV, or Happymodel), purchase the 65 frame from us, or even run it without the prop guards!
As you may know, Yves in Taiwan has created this unique kit consisting of a carbon fiber centerpiece with four detached ducts and an ultralight camera mounting system. The overall design is modular, customizable, durable and light-weight!
SKU: FE.F65LIT.FRAME. -
Accessories, Category Name, Frames
Fractal Engineering HD Hardware set for F65/75
The Fractal Engineering HD hardware set is a set of custom designed and printed, ultra-soft TPE grommets to fit both your whoop AIO and your VTX in a most compact way (8.5mm tall). This is for the Fractal F65/75.
Fits HDZero, Walksnail, naked Vista, etc..
SKU: FE.F6575.HDH.
Features:
- 65mm diagonal, squished X geometry, for 31mm props
- 1.5mm Carbon Fiber / Individual Nylon ducts hybrid construction
- Low-profile camera mount, no props in view, no tilt offset
- Low Center of Gravity, by bringing the AIO closer to the frame/motors
- Allows mounting with USB pointing up for easy accelerometer calibration
- No need for a canopy as all electronics are tucked safely between the ducts
- Maximum rigidity where it matters most; connecting the motors to the FC
- Easy maintenance, break one duct, replace only the single duct
Included:Â
- Fractal 65 Base Plate x 1
- Printed TPU fixations (camera, front and rear battery mounts) x 2
- M1.4x5mm steel machine screw for motors x 14
- M1.7x5mm self-threading screw for short board grommets x 4
- M1.7x7mm self-threading screw for long board grommets x 4
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Category Name, Frames, Micro/Whoop
Fractal Engineering Fractal 75 Lite Frame Kit 1.5mm
This is the Fractal 75 kit without the 75mm whoop frame to chop up for the prop guards. You can provide your own, purchase the V4 frame from us, or even run it without the prop guards!
As you may know, Yves in Taiwan has created this unique kit consisting of a carbon fiber centerpiece with four detached ducts and an ultralight camera mounting system. The overall design is modular, customizable, durable and light-weight!
SKU: FE.F75LIT.FRAME. -
Category Name, Electronics, Other Electronics
DarwinFPV Tiny Ape VTX 25/200/400/600 mW
DarwinFPV 600mW VTX is a light weight, small size, high quality 25-600mW VTX, it provides optional 25/200/400/600mW output power, integrated 4Pin socket, plug and play is very convenient. The VTX settings can be adjusted through the flight control, that is, the transmitted power, frequency band and channel.
Indicator Light Description:
Frequency and Power Control Method:
Adjust VTX frequency and power via Betaflight
â‘ Connect the RX white line of VTX to the TX signal line or SOFTSERIAL1 signal line of the FC spare UART port;
â‘¡Select the port tab, enable the TBS (SmartAudio) function setting of the connected port and save it;
(The above figure takes the TX signal line as an example; SOFTSERIAL1 is the same, just select the TBS (SmartAudio) function according to the corresponding port).
â‘¢ After entering the VTX parameter adjustment interface, select the desired frequency and power, and then “save” to save and exit.
SKU: DF.VTX.TINYAP. -
Category Name, Bind and Fly Quads, Micro/Whoop
Happymodel Moblite7 Walksnail Avatar 1S 75mm HD Whoop V2.0
Category Name, Bind and Fly Quads, Micro/WhoopHappymodel Moblite7 Walksnail Avatar 1S 75mm HD Whoop V2.0
The Happymodel Moblite 7 Walksnail Avatar Whoop is a 75mm HD brushless whoop weighing just 33.5 grams. It features the Walksnail Avatar 1S Mini VTX and Nano Camera and built-in SPI ELRS 2.4GHz.  With powerful RS1002 KV20000 motors, and Superbee F4 Lite flight controller, this is a great performing high-definition whoop you can fly just about anywhere.
V2.0 update log: Changed to GNB27 connector and V4 frame, no need 3d print battery tray anymore, and changed the propeller to Gemfan 1635-3 propellers.
SKU: HM.MOBLI7.WS.ELRS.
There are no reviews yet.