Whoop Features:
- Digital HD FPV experience
- New CrazyF405 ELRS HD flight controller
- Powerful and Smooth
- UART ExpressLRS 2.4GHz receiver
- Built-in blackbox for Gyroflow and PID Tune
Specifications:
- Frame: Happymodel Mobula8
- Flight Controller: CrazyF405HD UART ELRS AIO
- Motor: EX1103 KV11000 Brushless
- Propellers: Gemfan Hurricane 2023 tri-blade
- HD System: Walksnail Avatar HD Mini Lite
MOTOR
- Mode: EX1103 KV11000
- Configu-ration:9N12P
- Stator Diamter:11mm
- Stator Length:3mm
- Shaft Diameter:Φ1.5mm
- Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
- Weight(g):3.8g
- No.of Cells(Lipo):1-2S
FLIGHT CONTROLLER
- MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
- GYRO Sensor: BMI270 (SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Serial ExpressLRS 2.4G
- Built-in BMP280 Barometer
- Built-in 8MBp blackbox
- Built-in voltage meter sensor, voltage meter scale 110
- Built-in current meter sensor, current meter scale 470
ONBOARD 4-IN-1 ESC
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeli_S Bluejay firmware
- Factory firmware: Bluejay ESC V0.19
- Firmware target: Z-H-30
- Default protocol: DSHOT300
- When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200
ONBOARD UART ELRS 2.4GHZ RECEIVER
- Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- RF Frequency: 2.4GHz
- Antenna: enameled copper wire 31mm length
- Telemetry output Power: <12dBm
- Default firmware version: ExpressLRS V3.0.1
- Firmware target: HappyModel EP 2400 RX
- Could update firmware via ExpressLRS configurator
WALKSNAIL AVATAR DIGITAL SYSTEM
- Camera: Avatar Lite Camera
- Resolution: 1080P/60fps, 720P/120fps, 720P/60fps
- Ratio: 16/9 4/3
- FOV: 170 degrees
- Lens: 2.1mm
- VTX: Avatar Mini 1S Module
- Frequency: 5.725-5.850GHz
- Recording: 1808p/720p
- Storage: 8G
Included:
- Happymodel Mobula8 2S 85mm Walksnail HD Micro FPV Whoop Drone x 1
There are no reviews yet.