Happymodel X12 1-2S AIO Whoop F4 Flight Controller 12A ESC – ELRS version

Specifications:

• • ELRS Version: CRAZYBEEF4SX1280
  • Support 1-2S Lipo/LIHV battery
  • Brand Name: Happymodel
  • Betaflight firmware target: CRAZYBEEF4SX1280

• • Size: 30x30x8mm
  • VTX antenna: U.FL
  • Weight: 5.1g

FLIGHT CONTROLLER

• • Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470
  • Receiver Target:
  • X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
  • Sensor: ICM20689
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Power supply: 1-2S battery input (DC 2.9V-8.7V)
  • Built-in ExpressLRS 2.4G,Frsky D8/D16
  • Built-in 5.8G OpenVTX 0mw~400mw
  • Built-in 12A(each) Blheli_S 4in1 ESC
  • Built-in Betaflight OSD(SPI Control)
  • Mount hole size: 25.5mm*25.5mm

ONBOARD 4-IN-1 ESC

• • When use Blujay firmware with 48khz, should set startup power to 1100/1200
  • Current: 12A continuous peak 15A (3 seconds)
  • Factory firmware: Z_H_30_REV16_7.HEX
  • Support BLHeliSuite programmable
  • Power supply: 1-2S LiPo/LiPo HV
  • Default protocol: DSHOT300
  • Support Bluejay firmware

ONBOARD 5.8GHZ VTX

• • Transmitting Power: 0/RCE/25mw/100mw/400mw
  • Current (5v): <650ma (400mw)
  • Firmware version: OPENVTX
  • Antenna connector: U.FL
  • Power supply: DC 5V
  • RCE Mode support
  • PIT Mode support
  • SmartAudio v2.1
  • Channels:48ch

ONBOARD SPI ELRS 2.4GHz

• Packet Rate option: 50Hz/150Hz/250Hz/500Hz
• ExpressLRS Firmware version: V2.0
• RF Frequency: 2.4GHz
• Antenna : SMD antenna
• Telemetry output Power: <12dBm
• Receiver protocol: SPI ExpressLRS
• Compatible with ExpressLRS V2.0 TX Module

Included:

• 1x Happymodel X12 AIO 5-in-1 Board – F4 FC + 12A ESC (ELRS version)
• 1x Connecting Wires Set
• 1x Hardware Set
• 1x Antenna