Search results: “hdzero”
Showing all 21 results
-
Bind and Fly Quads, Category Name, Micro/Whoop
Happymodel Mobula8 2S 85mm Brushless HDZero HD Whoop – ELRS version
Bind and Fly Quads, Category Name, Micro/WhoopHappymodel Mobula8 2S 85mm Brushless HDZero HD Whoop – ELRS version
Here comes Mobula8 2S Digital HD FPV series with The HDZero Digital System, New CrazyF405 ELRS flight controller, EX1103 KV11000 motors and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight in HD Quality Video.
SKU: HM.MOBUL8.HDZ.ELRS. -
Bind and Fly Quads, Category Name, Micro/Whoop
(Pre-order) Happymodel Mobula6 ECO 2024 1S 65mm HDZero ELRS Ultra Light Whoop
Bind and Fly Quads, Category Name, Micro/Whoop(Pre-order) Happymodel Mobula6 ECO 2024 1S 65mm HDZero ELRS Ultra Light Whoop
This is a Pre-sale item shipping out as soon as it is received. Estimated ship date is mid April. All other items in your order will be held until this is available!
Happymodel Mobula 6 ECO 2024 is the first BNF that uses HDZero ECO Bundle.
HDZero ECO Bundle is designed to bring digital FPV to more pilots by offering a low cost, light weight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for.
This budget-friendly Air Unit is a groundbreaking product—it’s the first VTX/camera combination that utilizes a HD composite video signal, eliminating the need for a delicate MIPI cable.
The ECO FPV System was meticulously designed for ultra-lightweight drones like Tiny Whoops, where every fraction of a gram counts. The camera’s huge 98deg vertical FOV is perfect for fast indoor proximity flying. The ECO VTX weighs approximately 4.5g, while the camera (including wires) comes in at about 1.6g. With the included 0.2g dipole antenna, the entire Eco Bundle weighs about mere 6.3g in total.
SKU: HM.MOB6EC.ELRS. -
Bind and Fly Quads, Category Name, Micro/Whoop
Happymodel Bassline 2S Micro HDZero version – ELRS
This Happymodel Bassline is a 2S drone inspired by team pilot Nathan Loopz. The Bassline concept originated in 2019 and has now become one of the best freestyle micro drones in the HappyModel lineup. This toothpick drone can really zip around! The top components featured are the X12 5-in-1 AIO, Ex1103 11000KV motors, and this is the HDZero version!
Available from BMF in 2 versions:
SKU: HM.BASSLI.HDZ.ELRS. -
Bind and Fly Quads, Category Name, Micro/Whoop
Flywoo Firefly Nano Baby 20 2S Micro Quadcopter ELRS – HDZero
Bind and Fly Quads, Category Name, Micro/WhoopFlywoo Firefly Nano Baby 20 2S Micro Quadcopter ELRS – HDZero
Flywoo Firefly Nano Baby 20 2S Micro Quad BNF w/ HDZero is equipped with the most efficient micromotor and the top AIO flight controller on the market! This micro quadcopter will bring you an unprecedented flying experience; the Firefly Nano Baby 20 can do acrobatic motions smoothly, like diving and power looping.
*NOTE:
Action Cameras (Thumb Pro, Caddx Peanut, Thumb) not includedSKU: FW.NBABY2.HDZ.ELRS. -
-
Bind and Fly Quads, Micro/Whoop
Happymodel Mobula6 HDZero 1S 65mm Micro Whoop
The wait is over, the world’s first HDZero 65mm Whoop is here! The Mobula6 is a smooth and agile brushless drone that incorporates the HDZero Nano Lite Camera for a weight of 23.5 grams. Happymodel teamed up with HDZero, Runcam, Nick Burns, Mr. Shutterbug, Ryan Quellet, and many other enthusiasts to make this a reality.
*This is the ELRS version
*Batteries not includedSKU: HM.MOBUL6.HDZ.ELRS. -
FPV Equipment, HDZero
HDZero Nano V2 Camera
Runcam Nano V2 HDZero camera is a 4:3 and 16:9 selectable high definition 720p60 camera designed for HDZero VTX. It supports the camera menu for brightness, contrast, saturation, HV flip and other camera settings. It has excellent low light performance for its ultra-high sensitive sensor.
SKU: HZ.NANOV2.CAM. -
FPV Equipment, HDZero
HDZero Whoop Lite Bundle
Been waiting for 1s micro and whoop sized quads to go digital? The wait is finally over! HDZero Whoop Lite is here to meet these needs: HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g.
SKU: HZ.WLITE.BUNDLE. -
FPV Equipment, HDZero
HDZero Race V2 VTX
The HDZero Race VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.
SKU: HZ.RACEV2.VTX. -
-
FPV Equipment, HDZero
RunCam HDZero Micro V2 Camera
Runcam Micro V2 HDZero camera is a 4:3 and 16:9 selectable high definition 720p60 camera designed for HDZero VTX. It supports the camera menu for brightness, contrast, saturation, HV flip and other camera settings. It has excellent low light performance for its ultra-high sensitive sensor.
SKU: HZ.MICRV2.CAM. -
FPV Equipment, HDZero
HDZero Freestyle VTX
The HDZero Freestyle VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 1000mw on 5.8GHz. It works with the HDZero/Shark Byte goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera. The HDZero Freestyle VTX is a digital HD 720p 60fps 5.8GHZ video transmitter.
The power input range is 2S –4S. Though the VTX integrates a surge protection circuit, a large capacitor (450+uF) parallel with battery leads is mandatory to smooth the power supply of the whole quad.
The VTX includes a BEC that converts 2S-6S to fixed 5.8V with maximum 5A output current. The VTX also includes an U.FL RHCP antenna.The HDZero Freestyle VTX is a digital HD 720p 60fps 5.8GHZ video transmitter.The power input range is 2S –4S. Though the VTX integrates a surge protection circuit, a large capacitor (450+uF) parallel with battery leads is mandatory to smooth the power supply of the whole quad. The VTX includes a BEC that converts 2S-6S to fixed 5.8V with maximum 5A output current. The VTX also includes an U.FL RHCP antenna.
SKU: HZ.FREEST.VTX. -
FPV Equipment, HDZero
HDZero Whoop VTX
The HDZero Whoop VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 200mw on 5.8GHz. It works with the Shark Byte RX5.1 goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.
SKU: HZ.WHOOP.VTX. -
FPV Equipment, HDZero
HDZero VRX Digital HD Receiver Module
The HDZero VRX is a digital HD 720p 60fps video receiver on 5.8GHz. It works with the HDZero/Shark Byte VTX module to transmit video. This time around HDZero releasing their very own HD receiver module, the VRX4! This module is compatible with any goggle that suports HDMI input.
SKU: HZ.VRX.MODULE. -
3-4 Inch Quadcopters, Bind and Fly Quads
Happymodel Crux 35 HDZero 3.5″ Quad – ELRS version
CRUX35 HDZero is an ultra-lightweight 3.5Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 108g for the digital HD version. The Crux35 uses Happymodel EX1404 high-efficiency motor and HQPROP 3.5-inch three-blade propeller to ensure the largest thrust-to-weight ratio under the most efficient premise, which can bring you a smooth Freestyle flying experience.
This HDZero version is equipped with Runcam Nano Camera and the HDZero Whoop VTX.
This receiver version is the SPI ExpressLRS.
ExpressLRS is the most popular RC link system.NOTICE: ELRS SPI Version is updated to ExpressLRS v2.0 version
SKU: HM.CRUX35.HDZ.ELRS. -
-
Accessories, Category Name, Frames
Fractal Engineering HD Hardware set for F65/75
The Fractal Engineering HD hardware set is a set of custom designed and printed, ultra-soft TPE grommets to fit both your whoop AIO and your VTX in a most compact way (8.5mm tall). This is for the Fractal F65/75.
Fits HDZero, Walksnail, naked Vista, etc..
SKU: FE.F6575.HDH. -
Electronics, Flight Controllers
Happymodel X2 AIO F4 Flight Controller SPI ELRS RX 2-4S 12A ESC
The Happymodel ELRS X2 AIO Flight Controller is the direct replacement for the Mobula7 HDZero.
It comes with an integrated SPI 2.4GHz ELRS receiver and 12A Blheli_S ESC which supports 2-4S batteries. Bigger mosfet supports high to 12A currents and would be better for a 2-4S toothpick drone or long-range FPV drone. The 2.4GHz ExpressLRS receiver is equipped with the SX1280 radio frequency chip with high sensitivity, high packet rate, and low latency. Featuring an MPU 6000 SPI sensor and OSD, this board is the perfect addition to your FPV build.
SKU: HM.X2F4.FC.ELRS. -
Electronics, Flight Controllers
Happymodel SuperbeeF4 Lite AIO 1S FC 2.4GHz ELRS
The direct replacement AIO board for the Mobula6 HDZero. The default OSD is set to “MSP” since this is considered spare part for the Mobula6 HDZero.
If using this board with an analog camera you will need to change some settings in BetaFlight. Instructions can be found at SuperbeeF4
* ELRS version
SKU: HM.SPBEF4.FC.ELRS. -
Micro/Whoop, Propellers
Gemfan 1610-2 40mm (1.5mm Shaft) Propeller (4 pack)
A 40mm bi-blade prop from Gemfan. These are a fit on popular quads such as the Happymodel 1S Mobula 7/ Mobula 7 HD, Moblite7 HDZero 1s, and others with a 1.5mm center hole with prop length of 40mm.
SKU: GF.1610-2.GRAY.40MM.1*5MM.4PACK